41 installation location right seat position and the left abutment 51 by 45 positions T, E, 14X160 43 M14 screw and a self-locking nuts position two mounts. The two rack holder 38 is connected to the carriage position No. 41 and No. 51 positions, and use 42 position T, M14 T, 14X80 screws and 43 self-locking nut location. Cylinders and hose assembly installation position of the hydraulic cylinder 23, and the use of the 24th position of the connecting pin diameter 25X80 and 6X40 spring pin on the 25th position of the fastening. The hydraulic hoses on the 28th and the 29th position location connected to a hydraulic cylinder, the new hydraulic rakes, and use the 27th position 3/8 "self-tapping screws and copper washers on the 26th position fastening. On request N2 valve can be installed, Jinxian hydraulic rakes to lift only one side alone (40) Step 1: The drawbar on the 2nd position is connected to the central support 10 good location, and with good location 8 T, E, 20X160 screws, the 4th position 20MA self locking nut and No. 55 positions 350X160 fixing plate and tighten. Install the two wheels on the 22nd position, and with 16MB nuts on the 18th position. Installing the 5th position The feet in diameter on the 6th position of the fastening pin 15, and with a cotter pin to lock the 7th position 3X60 The connection on the 1st position of traction connecting rod, and with 25X130 and bolts on the 3rd position 56 16MA nut position. Hydraulic Cheap rakes, rakes (certified), Jinxian hydraulic rakes provided by Qufu, Shandong Baofeng Machinery Co., Qufu City, Shandong Province Baofeng Machinery Co. Company (www.sdbfkj.com) Shandong Jining, feed processing machinery leaders, over the years, the company implementing the scientific management, innovation and development, the principle of honesty and trustworthiness, and satisfy customer needs. In Baofeng mechanical leadership with the staff warm welcome all inquiries negotiations to create Baofeng mechanical better future.